TEST Internal Aquarium Filter

A fully submersible internal filter that provides mechanical filtration, water circulation and optional aeration. Suitable for freshwater and saltwater aquariums. Specifications: Power Consumption: 20 W Maximum Flow Rate: 1000 litres per hour Operating Voltage: AC 220–240 V Frequency: 50/60 Hz Installation & Usage: Rinse the filter sponge with clean, dechlorinated water before first use. Secure the filter vertically to the aquarium glass and keep the complete motor unit submerged. Position the outlet near the water surface for good circulation. For aeration, connect the supplied transparent air tube to the venturi inlet and keep its open end above the water level. A separate air pump is not required. Cleaning & Maintenance: Disconnect the power before removing the filter. Rinse the sponge in water removed from the aquarium and clean debris from the intake, impeller and impeller chamber. Do not use soap, chemicals or chlorinated tap water on the sponge. Safety Warnings: Never operate the filter outside water or allow it to run dry. Unplug it before placing your hands in the aquarium. Do not lift or carry the filter using its power cable. Do not use if the cable, plug or housing is damaged. Keep the socket above the water level and arrange the cable with a drip loop. Keep away from children.